How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of unique steps to add a second ignition key. It requires dealer service using a handheld computer dubbed Tech-2. Then it is necessary to purchase a new transponder. key have to be purchased.
It is an excellent idea to rotate your keys in order that one does not wear out more quickly than the other. This will keep your keys in good condition.
Replacement Case
The new key fobs aren't like the older Saab keys. They feature electronic components that make them difficult to copy. This has made theft of cars much more difficult than twenty years ago. However, it also has made replacing lost keys an incredibly expensive undertaking.
Saab 9-3 owners should have two keys working. If one is lost, it is expensive to get another one for the car because it involves replacing the CIM module and reprogramming the locking cylinders. Dealers will typically charge $100-$200 for this.
There are ways to avoid these high costs. Some parts suppliers can look up the code on an extra key (usually the same one that opens the doors and turns the ignition) and cut a brand new metal key blade at less than the dealer's cost. The key must be exactly the same as the original for it to function in your vehicle.
Follow these steps to replace the case. You will need to have a flathead and a lot of patience. With the screwdriver, pry away the plastic and take out the emergency key. Once you have the case open, remove the electronic components and place them inside your new case. Make sure you insert the correct key and badge back inside the case, too.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive component that can be easily and quickly replaced. This YouTube video from Cyclone Cyd demonstrates the procedure for replacing the remote fob battery with just four easy steps. This tutorial will work with any modern Saab key fob. However, the procedure may differ slightly.
The first step is to locate the button that releases the backup key in the fob. It is usually located near the Saab logo on the back of the fob. Then use a flathead screwdriver to insert into the small hole in this button. This should be sufficient to open the case so that you can change the battery.
After the new battery CR1632 is in place You can then reassemble the remote key fob, and then program it to your car. The entire process shouldn't exceed an hour. saab key fob programming www.g28carkeys.co.uk is a simple procedure that doesn't require any special equipment.
The process is a bit more complicated if you lose your key, but it is possible. The dealer will need to read the car's VIN and then request a replacement key blade and TWICE module with the exact unique code. The dealer will then have to program the key using MDI, a new software tool.
Key Replacement Fob
The key fob is the piece that locks and unlocks your car. It has a battery inside. The batteries have a lifespan and will eventually expire. This is a frequent issue for all vehicles. The good thing is that you can replace the battery in most key fobs without having to replace the entire case. Amazon sells replacement fobs with all the electronic components installed. It is easy to open the case and replace the batteries. You will need to remove the emergency key before you replace the batteries. To do this, place a small screwdriver that is flat into the slot that is in the middle of the. Use the screwdriver to move around the case, and it should split open, making it simple to remove.
When you are ready to replace the keys ensure you have a spare, as this can reduce your total cost by a substantial amount. If you do have a spare, you can have the dealer cut an additional key and program it to your car, which is much cheaper than replacing the whole key fob.
It is possible to add another key to your car even if you don't have one, however it requires a great deal of research and effort. It costs a few hundred dollars to purchase a second car key. The computer of the vehicle must also be programmed. This can be accomplished by a professional, however it's an expensive option for the majority of owners.
Replacement Ignition
Unlike the earlier Saab cars, the modern SAAB 9-3 models use an extremely sophisticated alarm system that is built around a coded key. This means that should you lose only one working key, replacing it with an additional one could be extremely costly since the car needs to have a specific computer module installed, and it must also be programmed to accept a new key. Most locksmiths can't do this, and even dealers can charge several hundred dollars to program the new key!
Dealers will charge you a high price to replace your car's computer (also known as the CIM or SAAB twice) in the event that you lose the only working key. We can reprogramme the existing EEPROM of your car's computer so that it's ready to accept an additional key. This will save you more than 50% off the cost you would have to pay a dealer.
If you've been a faithful owner of a 03-11 SAAB 9-3, you probably know that the ignition key isn't really all that robust. They can become extremely sticky, and the buttons are known to be removed from them occasionally and you should think about purchasing a new one if yours isn't working as it should. It's not so difficult as it may seem to replace the ignition key. With the right tools, it is able to be accomplished in a matter of minutes.